Maximum Principle Research Articles

Dynamic reliability analysis of angular contact ball bearing based on maximum entropy quadratic fourth moment method*

ABSTRACT Bearing failure occurs when the dynamic contact stress exceeds the yield strength of the bearing material during operation. To minimise the risk of bearing failure, a new reliability theory method is proposed based on the stress-strength model of bearings, incorporating random input variables to analyse the reliability of angular contact ball bearings (ACBBs) and quantify their dynamic performance. The maximum entropy quadratic fourth moment method is used to calculate the probability distribution of maximum orthogonal shear stress-strength of bearing, and the maximum entropy principle is used to obtain the approximation of the minimum human error factors. Additionally, reliability-based sensitivity indices are derived to investigate the parametric significance of random input variables. Using B218 bearing as an example, the engineering application of this method in dynamic reliability and reliability-based sensitivity analysis is illustrated. Monte Carlo simulation is performed to verify the accuracy and effectiveness of the method to provide benchmark results. The results show that the Poisson’s ratio have a greater influence on the dynamic reliability of ACBBs than other parameters. Improving parameters such as ball diameter, raceway groove curvature radius and contact angle can also improve the reliability of bearings to some extent.

Maximum principles for elliptic operators in unbounded Riemannian domains

The necessity of a Maximum Principle arises naturally when one is interested in the study of qualitative properties of solutions to partial differential equations. In general, to ensure the validity of these kinds of principles one has to consider some additional assumptions on the ambient manifold or on the differential operator. The present work aims to address, using both of these approaches, the problem of proving Maximum Principles for second order, elliptic operators acting on unbounded Riemannian domains under Dirichlet boundary conditions. Hence there is a natural division of this article in two distinct and standalone sections.

On the maximum principle and high-order, delay-free integrators for the viscous Cahn–Hilliard equation

On the maximum principle and high-order, delay-free integrators for the viscous Cahn–Hilliard equation

Introduction to Theoretical and Experimental aspects of Quantum Optimal Control

Abstract Quantum optimal control is a set of methods for designing time-varying electromagnetic fields to perform operations in quantum technologies. This tutorial paper introduces the basic elements of this theory based on the Pontryagin maximum principle, in a physicist-friendly way. An analogy with classical Lagrangian and Hamiltonian mechanics is proposed to present the main results used in this field. Emphasis is placed on the different numerical algorithms to solve a quantum optimal control problem. Several examples ranging from the control of two-level quantum systems to that of Bose-Einstein Condensates (BEC) in a one-dimensional optical lattice are studied in detail, using both analytical and numerical methods. Codes based on shooting method and gradient-based algorithms are provided. The connection between optimal processes and the quantum speed limit is also discussed in two-level quantum systems. In the case of BEC, the experimental implementation of optimal control protocols is described, both for two-level and many-level cases, with the current constraints and limitations of such platforms. This presentation is illustrated by the corresponding experimental results.

A Deformation Analysis Method for Sluice Structure Based on Panel Data

Deformation, as the most intuitive index, can reflect the operation status of hydraulic structures comprehensively, and reasonable analysis of deformation behavior has important guiding significance for structural long-term service. Currently, the health evaluation of dam deformation behavior has attracted widespread attention and extensive research from scholars due to its great importance. However, given that the sluice is a low-head hydraulic structure, the consequences of its failure are easily overlooked without sufficient attention. While the influencing factors of the sluice’s deformation are almost identical to those of a concrete dam, nonuniform deformation is the key issue in the sluice’s case because of the uneven property of the external load and soil foundation, and referencing the traditional deformation statistical model of a concrete dam cannot directly represent the nonuniform deformation behavior of a sluice. In this paper, we assume that the deformation at various positions of the sluice consist of both overall and individual effects, where overall effect values describe the deformation response trend of the sluice structure under external loads, and individual effect values represent the degree to which the deformation of a single point deviates from the overall deformation. Then, the random coefficient model of panel data is introduced into the analysis of sluice deformation to handle the unobservable overall and individual effects. Furthermore, the maximum entropy principle is applied, both to approximate the probability distribution function of individual effect extreme values and to determine the early warning indicators, completing the assessment and analysis of the nonuniform deformation state. Finally, taking a project as an example, we show that the method proposed can effectively identify the overall deformation trend of the sluice and the deviation degree of each measuring point from the overall deformation, which provides a novel approach for sluice deformation behavior research.

Convex hull property for elliptic and parabolic systems of PDE

We study the convex hull property for systems of partial differential equations. This is a generalization of the maximum principle for a single equation. We show that the convex hull property holds for a class of elliptic and parabolic systems of non-linear partial differential equations. In particular, this includes the case of the parabolic p-Laplace system. The coupling conditions for coefficients are demonstrated to be optimal by means of respective counterexamples.

Global attractivity for reaction–diffusion equations with periodic coefficients and time delays

In this paper, we provide sharp criteria of global attraction for a class of non-autonomous reaction–diffusion equations with delay and Neumann conditions. Our methodology is based on a subtle combination of some dynamical system tools and the maximum principle for parabolic equations. It is worth mentioning that our results are achieved under very weak and verifiable conditions. We apply our results to a wide variety of classical models, including the non-autonomous variants of Nicholson’s equation or the Mackey–Glass model. In some cases, our technique gives the optimal conditions for the global attraction.

Energy stable and maximum bound principle preserving schemes for the Allen-Cahn equation based on the Saul’yev methods

Energy stable and maximum bound principle preserving schemes for the Allen-Cahn equation based on the Saul’yev methods

Phase stability and mechanical properties of the six-principal element TiVNbCrCoNi alloys

This study designed a series of six-principal element TiVNbCrCoNi alloys according to the maximum entropy principle under the constraint of valence electron concentration (VEC). The phase stability and mechanical properties were investigated. It was showed that at VEC levels below 5.2, the body-centered cubic (BCC)-structured solid-solution phase remained stable at room temperature. As VEC exceeded 8.0, the face-centered cubic (FCC)-structured solid-solution phase stabilized. In the VEC range of 5.2–8.0, (Co, Ni)Ti and Ni3Nb intermetallic compounds formed combining with the solid-solution phases. Both yield strength and ductility increased with increase of VEC in the BCC-structured solid-solution alloys. The phase stability was elucidated through First-principle and thermodynamic calculations, while the evolution of mechanical properties of solid-solution alloys was evaluated in terms of multiple parameters. The thermodynamic calculation achieved satisfactory accuracy after being adjusted to utilize atomic bond enthalpy instead of atomic electronegativity difference.

Dynamics of a discrete one‐predator two‐prey system with Michaelis–Menten‐type prey harvesting and prey refuge

In this paper, we propose and study a discretized one‐predator two‐prey system along with prey refuge and Michaelis–Menten‐type prey harvesting. The interaction among the species is considered as Holling type III functional response. Firstly, existence and local stability of all the fixed points are derived under certain parametric conditions. Furthermore, a special consideration is made to global asymptotic stability of the interior fixed point. Then, we have shown that the system undergoes different types of bifurcations including transcritical bifurcation, flip bifurcation, and Neimark–Sacker bifurcation by using center manifold theorem, bifurcation theory, and normal form method. Also, Feigenbaum's constant of the system is calculated. It is observed that both harvesting and refuge have a stabilizing effect on the system, and the stabilizing effect of harvesting dominates the stabilizing effect of refuge. Of most interest is the finding of coexisting attractors and multistability. In particular, optimal harvesting policy has been obtained by extension of Pontryagin's maximum principle to discrete system. Finally, some intriguing numerical simulations are provided to verify our analytic findings and rich dynamics of the three species system.

Monotone Iterative Technique for a Kind of Nonlinear Fourth-Order Integro-Differential Equations and Its Application

In this paper, we consider the existence and iterative approximation of solutions for a class of nonlinear fourth-order integro-differential equations (IDEs) with Navier boundary conditions. We first prove the existence and uniqueness of analytical solutions for a linear fourth-order IDE, which has rich applications in engineering and physics, and then we establish a maximum principle for the corresponding operator. Based upon the maximum principle, we develop a monotone iterative technique in the presence of lower and upper solutions to obtain iterative solutions for the nonlocal nonlinear problem under certain conditions. Some examples are presented to illustrate the main results.

Optimal control of an infected prey–predator model with fear effect

In this paper, we propose and analyze a prey–predator model with the functional response of Beddington–DeAngelis and the fear effect that have infection only in prey populations. We determine existence criteria of several equilibria, and the stability at different equilibria are presented. We exert pesticide control over prey and additional food control over predators, the optimal control is obtained by the Pontryagin maximum principle. We confirm that adding controls to the predator and prey yields better results. Further we enrich our analysis with the inclusion of the existence and uniqueness of the optimal control. Finally, some numerical results to illustrate our analysis are presented.

Convergence analysis of the maximum principle preserving BDF2 scheme with variable time-steps for the space fractional Allen–Cahn equation

In this work, a fully implicit discrete scheme preserving the maximum principle is analyzed for solving the space fractional Allen–Cahn equation with variable step BDF2 in time. The convergence analysis in L∞ norm is rigorously proved under the same requirement of time-step ratios for the maximum principle by means of the kernels recombination technique. Furthermore, the unique solvability of the proposed scheme is theoretically guaranteed depending on the property of convex functions. The energy decay law with the consideration of Riesz fractional derivative is also proved under sufficient restrictions on time-steps and time-step ratios. Numerical experiments are given to validate the second order accuracy in time, the maximum principle as well as the energy decay law of the proposed numerical scheme. In particular, comparisons of errors and time levels for the adaptive time-stepping strategy and uniform time steps are conducted to demonstrate the efficiency of adaptive time-stepping strategy.

Analysis of the hate speech and racism co-existence dissemination model with optimal control strategies

Hate speech, racism, and their co-existence are the human mind infections that are major factors that affect the living conditions of people, societal well-being, and political stability, economic and social disturbance throughout the world especially in underdeveloped nations of the world. The main objective of this study is to formulate and analyze the hate-speech and racism co-existence model with optimal control strategies and investigate the optimal effects of protection and improvement (rehabilitation) strategies to minimize and tackle the hate speech and racism co-existence dissemination in the community. In this study, we have computed the hate speech sub-model, the racism sub-model, and the hate speech and racism co-existence model equilibrium points and analyzed their stabilities, using the next generation operator approach all the models' effective reproduction numbers are computed, examined the phenomenon of backward bifurcation whenever the model effective reproduction number is less than one where at which both the positive co-existence free equilibrium point and the positive co-existence dominance equilibrium point exist simultaneously. To achieve the objective minimizing the hate speech and racism co-existence dissemination dynamics by implementing the efforts towards the protection and improvement (rehabilitation) strategies, the optimal control problem is re-formulated, and optimal control analysis is performed for the co-existence model using Pontryagin's maximum principle. Numerical simulations using MATLAB ode45 solver with fourth-order Runge-Kutta numerical methods to investigate the behavior of the co-existence model solutions and to explore the optimal effects of the protections and improvements (rehabilitation) strategies for the hate speech and racism co-existence dynamics are then performed. From the results, we observed that implementing the protection and improvement (rehabilitation) strategies simultaneously is the most effective approach to minimize and tackle the speech and racism co-existence propagation in the community.

Maximum entropy determination of mammalian proteome dynamics

Full understanding of proteostasis and energy utilization in cells will require knowledge of the fraction of cell proteins being degraded with different half-lives and their rates of synthesis. We therefore developed a method to determine such information that combines mathematical analysis of protein degradation kinetics obtained in pulse-chase experiments with Bayesian data fitting using the maximum entropy principle. This approach will enable rapid analyses of whole-cell protein dynamics in different cell types, physiological states, and neurodegenerative disease. Using it, we obtained surprising insights about protein stabilities in cultured cells normally and upon activation of proteolysis by mTOR inhibition and increasing cAMP or cGMP. It revealed that >90% of protein content in dividing mammalian cell lines is long-lived, with half-lives of 24 to 200 h, and therefore comprises much of the proteins in daughter cells. The well-studied short-lived proteins (half-lives < 10 h) together comprise <2% of cell protein mass, but surprisingly account for 10 to 20% of measurable newly synthesized protein mass. Evolution thus appears to have minimized intracellular proteolysis except to rapidly eliminate misfolded and regulatory proteins.

CONTROL THEORY APPROACHES TO OPTIMIZE INFORMATION FLOW IN THE FACE OF UNCERTAINTY AND CONFLICTING DATA

The rapid spread of inaccurate information through social media has become a major concern in recent years. This paper presents a mathematical model for analyzing the impact of inaccurate information on the spread of accurate information in a network. We aim to evaluate the effectiveness of three different strategies of control: media literacy programs and fact-checking and a combination of both. The model is analyzed using the maximum principle of Pontryagin to derive the optimal control strategies for minimizing the spread of inaccurate information while maximizing the spread of accurate information. A numerical simulation is presented to illustrate the effectiveness of the control strategies, and statistical analysis is performed to compare the impact of the different control strategies on the spread of information. The results demonstrate that the combination of media literacy programs and fact-checking is the most effective strategy for increasing the spread of accurate information and reducing the spread of inaccurate information. These findings have important implications for the design of effective strategies to combat the spread of misinformation and promote the spread of accurate information in a network.

A mathematical analysis of the corruption dynamics model with optimal control strategy

Corruption is a global problem that affects many countries by destroying economic, social, and political development. Therefore, we have formulated and analyzed a mathematical model to understand better control measures that reduce corruption transmission with optimal control strategies. To verify the validity of this model, we examined a model analysis showing that the solution of the model is positive and bounded. The basic reproduction number R0 was computed by using the next-generation matrix. The formulated model was studied analytically and numerically in the context of corruption dynamics. The stability analysis of the formulated model showed that the corruption-free equilibrium is locally and globally asymptotically stable for R0 &amp;lt; 1, but the corruption-endemic equilibrium is globally asymptotically stable for R0 &amp;gt; 1. Furthermore, the optimal control strategy was expressed through the Pontryagin Maximum Principle by incorporating two control variables. Finally, numerical simulations for the optimal control model were performed using the Runge-Kutta fourth order forward and backward methods. This study showed that applying both mass education and law enforcement is the most efficient strategy to reduce the spread of corruption.

A Probabilistic Structural Damage Identification Method with a Generic Non-Convex Penalty

Due to the advantage that the non-convex penalty accurately characterizes the sparsity of structural damage, various models based on non-convex penalties have been effectively utilized to the field of structural damage identification. However, these models generally ignore the influence of the uncertainty on the damage identification, which inevitably reduces the accuracy of damage identification. To improve the damage identification accuracy, a probabilistic structural damage identification method with a generic non-convex penalty is proposed, where the uncertainty corresponding to each mode is quantified using the separate Gaussian distribution. The proposed model is estimated via the iteratively reweighted least squares optimization algorithm according to the maximum likelihood principle. The numerical and experimental results illustrate that the proposed method improves the damage identification accuracy by 3.98% and 7.25% compared to the original model, respectively.

Evolution of tensile strength and ductility of the non-equimolar TiVNbMoCr alloys with maximum entropy under the VEC constraint

In this work, a series of non-equimolar TiVNbMoCr alloys were designed according to the maximum entropy principle under the valence electron concentration (VEC) constraint. The effect of the physical parameters on tensile strength and elongation was experimentally investigated and comprehensively discussed. It was found that the lattice constant a and the average grain size d vary with relative changes in the content of each component, and exhibit negative correlations to VEC. Whereas, the self-interstitial formation energy Ei, the atomic radius mismatch δ, the shear modulus mismatch η and the shear modulus G exhibit positive correlations to VEC. These parameters have a significant impact on tensile properties of the alloys. Except for Burgers vector magnitude, the critical physical parameters in the Senkov and Labusch-Maresca-Curtin's strengthening models are positively correlated to the yield strength. The ductility of the solid-solution TiVNbMoCr alloys is related to VEC, a, d and the grain boundary characteristics in strain accommodation, which respectively belong to intrinsic, crystallography structural and microstructural types of parameters.

Mathematical modeling and optimal control of multi-strain COVID-19 spread in discrete time

This research article presents a mathematical model that tracks and monitors the spread of COVID-19 strains in a discrete time frame. The study incorporates two control strategies to reduce the transmission of these strains: vaccination and providing appropriate treatment and medication for each strain separately. Optimal controls were established using Pontryagin's maximum principle in discrete time, and the optimality system was solved using an iterative method. To validate the effectiveness of the theoretical findings, numerical simulations were conducted to demonstrate the impact of the implemented strategies in limiting the spread of COVID-19 mutant strains.